Açıklama
| Designation | TIH 100m | |
| SKF m20 performance | 97 kg (213 lb) | |
| Voltage, V/Hz | – TIH 100M/230V | 230V/50-60Hz |
| – TIH 100M/MV | 400-460V/50-60Hz | |
| Bearing: | – Maximum weight | 120 kg (264 lb) |
| – Maximum bore diameter | 20 – 400 mm (0.8 – 15.7 in.) | |
| Temperature control: | – Range * | 0 – 250 °C (32 – 482 °F) |
| – Magnetic probe | Yes, K-type | |
| – Accuracy (electronics) | ± 2 °C (± 3,6 °F) | |
| Time control: | – Range | 0 – 60 minutes |
| – Accuracy | ± 0,01 sec. | |
| Performance example: | – bearing, weight, temperature, time | 23156 CC/W33, 97 kg, 110 °C, 20m |
| Thermometer mode | Yes | |
| Bearing mode | Yes | |
| Power reduction | 2-step; 50 – 100% | |
| Demagnetisation according to SKF norms (automatic) | Yes (<2 A/cm) | |
| Can heat sealed bearings | Yes | |
| Can heat pre – greased bearings | Yes | |
| Error guiding codes | Yes | |
| Thermal overload protection | Yes | |
| Maximum magnetic flux | 1,7 T | |
| Control panel | Key board with LED in remote control | |
| Operating area (w × h) | 155 × 205 mm (6.1 × 8.0 in.) | |
| Coil diameter | 110 mm (4.3 in.) | |
| Dimensions (w × d × h) | 570 × 230 × 350 mm (22.4 × 9.0 × 13.7 in.) | |
| Total weight, including yokes | 42 kg (92 lb) | |
| Maximum power consumption | 3,6 kVA (230V) | |
| 4,0-4,6 kVA (400-460V) | ||
| Number of standard yokes | 3 | |
| Standard yokes | 56 × 56 × 296 mm (2.2 × 2.2 × 11.7 in.), for heating bearings with bore diameter of 80 mm (3.1 in.) and larger | |
| 28 × 28 × 296 mm (1.1 × 1.1 × 11.7 in.), for heating bearings with bore diameter of 40 mm (1.6 in.) and larger | ||
| 14 × 14 × 296 mm (0.6 × 0.6 × 11.7 in.), for heating bearings with bore diameter of 20 mm (0.8 in.) and larger | ||
| Core cross section | 56 × 56 mm (2.2 × 2.2 in.) | |
| Yoke storage | Yes, foldable | |
| Sliding arm | No | |
| Swivel arm | Yes, large yoke only | |
| Cooling fan | No | |
| Housing material | Steel and glass filled polyamide | |
| * Maximum heating temperature capacity depends on the weight and geometry of the bearing or workpiece. The heaters can achieve higher temperatures, please contact SKF for advice. | ||
| Designation | Description |
| TIH 100-Y6 | Optional yoke 40 x 40 x 296 mm (1.6 x 1.6 x 11.6 in) |
| TIH 100-Y3 | Optional yoke 20 x 20 x 296 mm (0.8 x 0.8 x 11.6 in) |
| Designation | Description |
| TIH 100-Y8 | Standard yoke 56 x 56 x 296 mm (2.2 x 2.2 x 11.6 in) |
| TIH 100-Y4 | Standard yoke 28 x 28 x 296 mm (1.1 x 1.1 x 11.6 in) |
| TIH 100-Y2 | Standard yoke 14 x 14 x 296 mm (0.5 x 0.5 x 11.6 in) |
| TIH RC | Remote control with integrated LED display and control panel |
| TIH 100-P230V | Power print 230V – 220-240V, 50-60 Hz |
| TIH 100-PMV | Power print 400-460V, 50-60 Hz |
| TIH CP | Control print |
| TIH CB16A | Circuit breaker 16A for TIH 100m/230V |
| TIH CB10A | Circuit breaker 10A for TIH 100m/MV |
| TIH P20 | Temperature probe, K-type |
| TIH 100-SW | Swivel set |
| LGAF 3E/0.035 | Tube of anti-fretting paste for heater maintenance |
