TKBA 10 SKF

2.216,42

TKBA 10 SKF V Kayış Kasnak Hizalama Ayar Cihazı

Açıklama

TKBA 10 SKF V Kayış Kasnak Hizalama Ayar Cihazı

https://www.skf.com/binaries/pub12/Images/0901d196802ca82b-14173EN_TKBA_tcm_12-145923.pdf#cid-145923

TECHNICAL DATA TKBA 10
Designation TKBA 10
Type of laser Red laser diode
Laser 1x Built-in class 2 laser, <1 mW, 635 nm
Laser line length 2 m at 2 m (6.6 ft at 6.6 ft)
Measurement accuracy angular Better than 0,02° at 2 m (6.6 ft)
Measurement accuracy offset Better than 0,5 mm (0.02 in.)
Measurement distance 50 mm to 3 000 mm (2 in. to 10 ft)
Control Laser on/off rocker switch
Housing material Aluminum, powder coat finish
Dimensions   Transmitter unit 169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.)
  Receiver unit 169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.)
  Reflector dimensions 22 x 32 mm (0.9 x 1.3 in.)
Weight   Transmitter unit 365 g (0.8 lbs)
  Receiver unit 340 g (0.7 lbs)
Mounting Magnetic, side mounted
V-guides N/A
Battery 2x AAA Alkaline type IEC LR03
Operation time 25 hours continuous operation
Carrying case dimensions 260 x 85 x 180 mm (10.3 x 3.4 x 7.0 in.)
Total weight (incl. case) 1,3 kg (2.9 lbs)
Operating temperature 0 to 40 °C (32 to 104 °F)
Storage temperature –20 to +60 °C (–4 to +140 °F)
Relative humidity 10 to 90% RH non-condensing
IP rating IP 40
Calibration certificate Valid for two years
Case contents 1x TKBA 10 transmitter unit
1x TKBA 10 receiver unit
2x AAA batteries
1x Printed instructions for use
1x Calibration certificate

İncelemeler

Henüz inceleme yapılmadı.

“TKBA 10 SKF” için yorum yapan ilk kişi siz olun

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Başa dön